Dhairya Engineering

The IC693CHS392 is a 10-slot expansion baseplate from the Series 90-30 Programmable Logic Controller (PLC) platform. Formerly manufactured by GE Fanuc, now under Emerson Automation, this baseplate mainly features Ten (10) I/O slots, One (1) Power Supply slot, and One (1) expansion port. This module supports the installation of standard Series 90-30 I/O modules and specialty modules. It is designed for direct panels through the mounting tabs provided. It has an embedded DIP switch for the setting of the rack address. The maximum allowable total distance of interconnecting cables must not exceed 50 feet or 15 meters.

The GE Fanuc IC693PWR321 is a Standard Power Supply module that is part of the GE Fanuc Series 90-30 platform. This power supply has load capacity of 30 Watts with nominal input voltage of 100 to 240 VAC or 125 VDC. It has output capacities of 15 watts @ 5VDC, 20 Watts @ 24VDC and 15 Watts @ +24VDC Relay.

The IC693CPU351 is a Series 90-30 component that is manufactured by GE Fanuc. This is a single-slot modular CPU. It is installed with an 80386EX processor with 25MHz clock speed and maximum user program memory of 240Kbytes. It supports 2048 Discrete Inputs, 2048 Discrete outputs, 32,640 (max) Analog input Words and 32640 Analog output Words (max). It has Three (3) serial ports supporting SNP / SNP-X slave protocols on power supply connector, RTU slave and SNP / SPNX master slave of serial ports 1 and 2. This processor has typical scan rate of 0.3 milliseconds per 1K of Boolean logic.

The IC693CHS391 is a Series 90-30 component that is manufactured by GE Fanuc. This is a 10-slot Modular CPU baseplate. This baseplate hosts the CPU slot, non-CPU or I/O slots, Power supply and I/O expansion bus port. It also hosts the local electronic backplane to power the attached modules. Only One (1) CPU baseplate can be installed in a system, other baseplate permitted are expansion or remote I/O baseplate.