Dhairya Engineering

SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, central processing unit with work memory 200 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 3-port switch, 25 ns bit performance, SIMATIC Memory Card

SIMATIC DP, Electronics module ET 200S: 2AI RTD High Feature, 15 mm width, 15 bit+sign accuracy +/-0.1%, for 2-/3-/4-wire sensors, with internal compensation of the line resistance, with SF LED (group fault)

SIMATIC DP, connection IM 153-1, for ET 200M, for max. 8 S7-300 modules,.9-Pin, 24 VDC, 350 mA Input, 90 mA Output, 3 W, 1 A at 5 VDC Bus, 0 to 60 deg C, 125 mm H x 40 mm W x 117 mm D

SIMATIC S7-200, Digital I/O EM 223, only for S7-22X CPU, 32DI 24 V DC, Sink/Source, 32DO 24 V DC; 0.75 A/channel, SOURC

Basically the Mitsubishi FX1N-60MR-001 Programmable Logic Controller is monitoring, checking input devices. It generates output based on custom programs. The custom program provided to Mitsubishi PLC power supply. Mitsubishi PLC has 30 years' experience in industrial and factory field.

The Mitsubishi FX2N-2DA is a 2-channel, 12-bit analog output module that converts digital values from a PLC to either voltage (0-10V or 0-5V) or current (4-20mA) outputs, allowing for precise analog control of devices. 

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), HART, Ex/nEx, double-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable

SIPART PS2 Smart, electropneumatic positioner, 4...20mA (3/4-wire), HART, Ex/nEx, single-acting, polycarbonate enclosure, for pneumatic linear and part-turn actuators. Standard Type of protection (Ex): Intrinsic safety (Ex i). Output isolator SITRANS I200 separately orderable (7NG4131-1AA00). Connection thread el.: 1/2" NPT / pneu.: 1/4" NPT Without limit monitor. Without option module. . Brief instructions English / German / Chinese. Standard / Fail-Safe - Depressurizing the actuator in case of failure of electrical auxiliary power (single acting only). Without Manometer block / Booster.

SIMATIC S7-300, Digital input SM 321, Isolated 32 DI, 24 V DC, 1x 40-pole SIMATIC S7-300, Digital input SM 321, Isolated 32 DI, 24 V DC, 1x 40-pole

SIMATIC S7-200, PROFIBUS DP Slave module, 9.6 KB to 12 MB, 1 interface PROFIBUS-DP/MPI 

SIMATIC S7-400H, CPU 412-5H, central processing unit for S7-400H and S7-400F/FH, 5 interfaces: 1x MPI/DP, 1x DP, 1x PN and 2 for sync modules, 1 MB memory (512 KB data/512 KB program) 

SIMATIC S7-200, Digital output EM 222, only for S7-22X CPU, 8 DA (relay outputs), 2A Supply voltage. Load voltage L+. ○ Rated value (DC). 24 V. ○ permissible range, lower limit (DC). 5 V. ○ permissible range, upper limit (DC).

The IC694BEM331 is a Genius I/O Bus controller made by GE Fanuc Automation for the Fanuc line. 

SIMATIC S7-200, Analog input EM 231, only for S7-22X CPU, 8 AI, +/-80 MV a. thermocouples Type J, K, S, T, R, E, N; 15 bit+sign

SIMATIC DP PROFIBUS bus connector designed for connecting PROFIBUS nodes to a network, featuring a 90-degree angled cable outlet, screw terminals, and a maximum transmission rate of 12 Mbit/s

Siemens SIMATIC S7-400 RAM memory card designed to provide 4 Mbytes of memory for S7-400 PLCs. This long-design memory card is part of the SIMATIC S7 family, offering reliable, high-capacity storage for automation systems and is actively available in the market. 

The IC694MDL660 is a 32-point, 24 VDC positive/negative logic input module for the GE Fanuc RX3i PACSystem. It features 4 isolated groups of 8 points each, accepting 0-30 VDC signals. It is designed for high-density, configurable input filtering (0.5–100 ms) and requires a 24V DC source to operate in negative (sourcing) or positive (sinking) logic. 

a serial communication expansion unit for Omron CJ-series PLCs, providing two RS-232C ports to connect to host computers, HMIs, and other devices, supporting protocols like Host Link, Modbus (RTU/ASCII), NT Link, and custom Protocol Macros for versatile industrial data exchange and increased system connectivity. It's a CPU Bus unit, easily mounted on the PLC rack, offering high-speed data transfer and features like a Simple Backup Function for macro data.